Australia Bunk Bed Compliance AS/NZS 4220

Understanding AS/NZS 4220:2010 for Bunk Bed Procurement in Australia

AS/NZS 4220:2010 is the Australian/New Zealand standard covering the safety requirements for bunk beds supplied into the Australian market. If you are tendering for a dormitory, hostel, correctional or camp project in Australia, this page explains what the standard typically addresses so you can write and review a specification with confidence.

What AS/NZS 4220:2010 typically covers

• Guardrail height and continuity on the open side(s) of the upper berth to prevent falls.
• Spacing rules for guardrail gaps and the distance between the upper mattress and any structure above.
• Ladder safety - angle, rung spacing and secure attachment.
• Structural integrity and load - the bed must remain stable and safe under intended use.
• Materials and finishes suited to continuous institutional or commercial use.

How Zehao supports Australian buyers

Zehao metal bunk beds are engineered and tested to EN 747 (European bunk-bed safety) with independent SGS load testing at 200 kg per berth, and are finished with anti-rust powder coating built for institutional use.

For Australian projects that reference AS/NZS 4220:2010, we work with each buyer on their specific compliance and documentation requirements - including certification pathways, test references and tender support. Because compliance obligations differ by state, sector and contract, the right next step is to share your specification with our team so we can map it to the build.

A practical checklist for your Australian specification

1. State the standard and edition your contract requires (e.g. AS/NZS 4220:2010).
2. Define the required guardrail height and gap limits.
3. Set the load rating expected for each berth.
4. Confirm finish, fixings and any anti-tamper needs for the setting.
5. Request test reports and certificates matching your stated standard.

Frequently Asked Questions